Logo Search packages:      
Sourcecode: octave2.9 version File versions

sighandlers.cc

/*

Copyright (C) 1996, 1997 John W. Eaton

This file is part of Octave.

Octave is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2, or (at your option) any
later version.

Octave is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
for more details.

You should have received a copy of the GNU General Public License
along with Octave; see the file COPYING.  If not, write to the Free
Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
02110-1301, USA.

*/

#ifdef HAVE_CONFIG_H
#include <config.h>
#endif

#include <cstdlib>

#include <iostream>
#include <new>

#ifdef HAVE_UNISTD_H
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#include <unistd.h>
#endif

#include "cmd-edit.h"
#include "oct-syscalls.h"
#include "quit.h"

#include "defun.h"
#include "error.h"
#include "load-save.h"
#include "oct-map.h"
#include "pager.h"
#include "pt-bp.h"
#include "sighandlers.h"
#include "sysdep.h"
#include "syswait.h"
#include "toplev.h"
#include "utils.h"
#include "variables.h"

// Nonzero means we have already printed a message for this series of
// SIGPIPES.  We assume that the writer will eventually give up.
int pipe_handler_error_count = 0;

// TRUE means we can be interrupted.
bool can_interrupt = false;

// TRUE means we should try to enter the debugger on SIGINT.
static bool Vdebug_on_interrupt = false;

// Allow users to avoid writing octave-core for SIGHUP (sent by
// closing gnome-terminal, for example).  Note that this variable has
// no effect if Vcrash_dumps_octave_core is FALSE.
static bool Vsighup_dumps_octave_core = true;

// Similar to Vsighup_dumps_octave_core, but for SIGTERM signal.
static bool Vsigterm_dumps_octave_core = true;

#if defined (RETSIGTYPE_IS_VOID)
#define SIGHANDLER_RETURN(status) return
#else
#define SIGHANDLER_RETURN(status) return status
#endif

#if defined (MUST_REINSTALL_SIGHANDLERS)
#define MAYBE_REINSTALL_SIGHANDLER(sig, handler) \
  octave_set_signal_handler (sig, handler)
#define REINSTALL_USES_SIG 1
#else
#define MAYBE_REINSTALL_SIGHANDLER(sig, handler) \
  do { } while (0)
#endif

#if defined (__EMX__)
#define MAYBE_ACK_SIGNAL(sig) \
  octave_set_signal_handler (sig, SIG_ACK)
#define ACK_USES_SIG 1
#else
#define MAYBE_ACK_SIGNAL(sig) \
  do { } while (0)
#endif

// List of signals we have caught since last call to octave_signal_handler.
static bool octave_signals_caught[NSIG];

// Called from OCTAVE_QUIT to actually do something about the signals
// we have caught.

void
octave_signal_handler (void)
{
  // The list of signals is relatively short, so we will just go
  // linearly through the list.

  for (int i = 0; i < NSIG; i++)
    {
      if (octave_signals_caught[i])
      {
        octave_signals_caught[i] = false;

        switch (i)
          {
#ifdef SIGCHLD
          case SIGCHLD:
            octave_child_list::reap ();
            break;
#endif

          case SIGFPE:
            std::cerr << "warning: floating point exception -- trying to return to prompt" << std::endl;
            break;

#ifdef SIGPIPE
          case SIGPIPE:
            std::cerr << "warning: broken pipe -- some output may be lost" << std::endl;
            break;
#endif
          }
      }
    }
}

static void
my_friendly_exit (const char *sig_name, int sig_number,
              bool save_vars = true)
{
  static bool been_there_done_that = false;

  if (been_there_done_that)
    {
#if defined (SIGABRT)
      octave_set_signal_handler (SIGABRT, SIG_DFL);
#endif

      std::cerr << "panic: attempted clean up apparently failed -- aborting...\n";

      MINGW_SIGNAL_CLEANUP ();

      abort ();
    }
  else
    {
      been_there_done_that = true;

      std::cerr << "panic: " << sig_name << " -- stopping myself...\n";

      if (save_vars)
      dump_octave_core ();

      if (sig_number < 0)
      {
        MINGW_SIGNAL_CLEANUP ();

        exit (1);
      }
      else
      {
        octave_set_signal_handler (sig_number, SIG_DFL);

#if defined (HAVE_RAISE)
        raise (sig_number);
#elif defined (HAVE_KILL)
        kill (getpid (), sig_number);
#else
        exit (1);
#endif
      }

    }
}

sig_handler *
octave_set_signal_handler (int sig, sig_handler *handler,
                     bool restart_syscalls)
{
#if defined (HAVE_POSIX_SIGNALS)
  struct sigaction act, oact;

  act.sa_handler = handler;
  act.sa_flags = 0;

  if (sig == SIGALRM)
    {
#if defined (SA_INTERRUPT)
      act.sa_flags |= SA_INTERRUPT;
#endif
    }
#if defined (SA_RESTART)
  // FIXME -- Do we also need to explicitly disable SA_RESTART?
  else if (restart_syscalls)
    act.sa_flags |= SA_RESTART;
#endif

  sigemptyset (&act.sa_mask);
  sigemptyset (&oact.sa_mask);

  sigaction (sig, &act, &oact);

  return oact.sa_handler;
#else
  return signal (sig, handler);
#endif
}

static RETSIGTYPE
generic_sig_handler (int sig)
{
  my_friendly_exit (strsignal (sig), sig);

  SIGHANDLER_RETURN (0);
}

// Handle SIGCHLD.

#ifdef SIGCHLD
static RETSIGTYPE
sigchld_handler (int /* sig */)
{
  volatile octave_interrupt_handler saved_interrupt_handler
     = octave_ignore_interrupts ();

  // I wonder if this is really right, or if SIGCHLD should just be
  // blocked on OS/2 systems the same as for systems with POSIX signal
  // functions.

#if defined (__EMX__)
  volatile sig_handler *saved_sigchld_handler
    = octave_set_signal_handler (SIGCHLD, SIG_IGN);
#endif

  sigset_t set, oset;

  BLOCK_CHILD (set, oset);

  if (octave_child_list::wait ())
    {
      // The status of some child changed.

      octave_signal_caught = 1;

      octave_signals_caught[SIGCHLD] = true;
    }

  octave_set_interrupt_handler (saved_interrupt_handler);

  UNBLOCK_CHILD (oset);

#ifdef __EMX__
  octave_set_signal_handler (SIGCHLD, saved_sigchld_handler);
#endif

  MAYBE_ACK_SIGNAL (SIGCHLD);

  MAYBE_REINSTALL_SIGHANDLER (SIGCHLD, sigchld_handler);

  SIGHANDLER_RETURN (0);
}
#endif /* defined(SIGCHLD) */

#ifdef SIGFPE
#if defined (__alpha__)
static RETSIGTYPE
sigfpe_handler (int /* sig */)
{
  MAYBE_ACK_SIGNAL (SIGFPE);

  MAYBE_REINSTALL_SIGHANDLER (SIGFPE, sigfpe_handler);

  if (can_interrupt && octave_interrupt_state >= 0)
    {
      octave_signal_caught = 1;

      octave_signals_caught[SIGFPE] = true;

      octave_interrupt_state++;
    }

  SIGHANDLER_RETURN (0);
}
#endif /* defined(__alpha__) */
#endif /* defined(SIGFPE) */

#if defined (SIGHUP) || defined (SIGTERM)
static RETSIGTYPE
sig_hup_or_term_handler (int sig)
{
  MAYBE_ACK_SIGNAL (sig);

  MAYBE_REINSTALL_SIGHANDLER (sig, sig_hup_or_term_handler);

  switch (sig)
    {
#if defined (SIGHUP)
    case SIGHUP:
      {
      if (Vsighup_dumps_octave_core)
        dump_octave_core ();
      }
      break;
#endif

#if defined (SIGTERM)
    case SIGTERM:
      {
      if (Vsigterm_dumps_octave_core)
        dump_octave_core ();
      }
      break;
#endif

    default:
      break;
    }

  clean_up_and_exit (0);

  SIGHANDLER_RETURN (0);
}
#endif

#if 0
#if defined (SIGWINCH)
static RETSIGTYPE
sigwinch_handler (int /* sig */)
{
  MAYBE_ACK_SIGNAL (SIGWINCH);

  MAYBE_REINSTALL_SIGHANDLER (SIGWINCH, sigwinch_handler);

  command_editor::resize_terminal ();

  SIGHANDLER_RETURN (0);
}
#endif
#endif

// Handle SIGINT by restarting the parser (see octave.cc).
//
// This also has to work for SIGBREAK (on systems that have it), so we
// use the value of sig, instead of just assuming that it is called
// for SIGINT only.

static
void user_abort(const char *sig_name, int sig_number)
{
  if (! octave_initialized)
    exit (1);

  if (can_interrupt)
    {
      if (Vdebug_on_interrupt)
      {
        if (! octave_debug_on_interrupt_state)
          {
            octave_debug_on_interrupt_state = true;

            return;
          }
        else
          // Clear the flag and do normal interrupt stuff.
          octave_debug_on_interrupt_state = false;
      }

      if (octave_interrupt_immediately)
      octave_jump_to_enclosing_context ();
      else
      {
        // If we are already cleaning up from a previous interrupt,
        // take note of the fact that another interrupt signal has
        // arrived.

        if (octave_interrupt_state < 0)
          octave_interrupt_state = 0;

        octave_signal_caught = 1;
        octave_interrupt_state++;

        if (interactive && octave_interrupt_state == 2)
          std::cerr << "Press Control-C again to abort." << std::endl;

        if (octave_interrupt_state >= 3)
          my_friendly_exit (sig_name, sig_number, true);
      }
    }

}

static RETSIGTYPE
sigint_handler (int sig)
{
  MAYBE_ACK_SIGNAL (sig);

  MAYBE_REINSTALL_SIGHANDLER (sig, sigint_handler);

#ifdef USE_W32_SIGINT
  if (w32_in_main_thread ())
    user_abort (strsignal (sig), sig);
  else
    w32_raise (sig);
#else
  user_abort (strsignal (sig), sig);
#endif

  SIGHANDLER_RETURN (0);
}

#ifdef SIGPIPE
static RETSIGTYPE
sigpipe_handler (int /* sig */)
{
  MAYBE_ACK_SIGNAL (SIGPIPE);

  MAYBE_REINSTALL_SIGHANDLER (SIGPIPE, sigpipe_handler);

  octave_signal_caught = 1;

  octave_signals_caught[SIGPIPE] = true;

  // Don't loop forever on account of this.

  if (pipe_handler_error_count++ > 100 && octave_interrupt_state >= 0)
    octave_interrupt_state++;

  SIGHANDLER_RETURN (0);
}
#endif /* defined(SIGPIPE) */

#ifdef USE_W32_SIGINT
static BOOL CALLBACK
w32_sigint_handler (DWORD sig)
{
  const char *sig_name;

  switch(sig)
    {
      case CTRL_BREAK_EVENT:   
      sig_name = "Ctrl-Break"; 
      break;
      case CTRL_C_EVENT:
      sig_name = "Ctrl-C";
      break;
      case CTRL_CLOSE_EVENT:
      sig_name = "close console";
      break;
      case CTRL_LOGOFF_EVENT:
      sig_name = "logoff";
      break;
      case CTRL_SHUTDOWN_EVENT:
      sig_name = "shutdown";
      break;
      default:
      sig_name = "unknown console event";
      break;
    }

  switch(sig)
    {
      case CTRL_BREAK_EVENT:
      case CTRL_C_EVENT:
      w32_raise (SIGINT);
        break;

      case CTRL_CLOSE_EVENT:
      case CTRL_LOGOFF_EVENT:
      case CTRL_SHUTDOWN_EVENT:
      default:
        // We should do the following:
        //    clean_up_and_exit (0);
        // We can't because we aren't running in the normal Octave thread.
      user_abort(sig_name, sig);
        break;
    }

  // Return TRUE if the event was handled, or FALSE if another handler 
  // should be called.
  // FIXME check that windows terminates the thread.
  return TRUE;
}
#endif /* w32_sigint_handler */


octave_interrupt_handler
octave_catch_interrupts (void)
{
  octave_interrupt_handler retval;

#ifdef SIGINT
  retval.int_handler = octave_set_signal_handler (SIGINT, sigint_handler);
#endif

#ifdef SIGBREAK
  retval.brk_handler = octave_set_signal_handler (SIGBREAK, sigint_handler);
#endif

#ifdef USE_W32_SIGINT

  // Intercept windows console control events.
  // Note that the windows console signal handlers chain, so if 
  // install_signal_handlers is called more than once in the same program,
  // then first call the following to avoid duplicates:
  //
  //   SetConsoleCtrlHandler (w32_sigint_handler, FALSE);

  if (! SetConsoleCtrlHandler (w32_sigint_handler, TRUE))
    error ("SetConsoleCtrlHandler failed with %ld\n", GetLastError ());

  w32_set_quiet_shutdown ();

#endif

  return retval;
}

octave_interrupt_handler
octave_ignore_interrupts (void)
{
  octave_interrupt_handler retval;

#ifdef SIGINT
  retval.int_handler = octave_set_signal_handler (SIGINT, SIG_IGN);
#endif

#ifdef SIGBREAK
  retval.brk_handler = octave_set_signal_handler (SIGBREAK, SIG_IGN);
#endif

  return retval;
}

octave_interrupt_handler
octave_set_interrupt_handler (const volatile octave_interrupt_handler& h,
                        bool restart_syscalls)
{
  octave_interrupt_handler retval;

#ifdef SIGINT
  retval.int_handler = octave_set_signal_handler (SIGINT, h.int_handler,
                                      restart_syscalls);
#endif

#ifdef SIGBREAK
  retval.brk_handler = octave_set_signal_handler (SIGBREAK, h.brk_handler,
                                      restart_syscalls);
#endif

  return retval;
}

// Install all the handlers for the signals we might care about.

void
install_signal_handlers (void)
{
  for (int i = 0; i < NSIG; i++)
    octave_signals_caught[i] = false;

  octave_catch_interrupts ();

#ifdef SIGABRT
  octave_set_signal_handler (SIGABRT, generic_sig_handler);
#endif

#ifdef SIGALRM
  octave_set_signal_handler (SIGALRM, generic_sig_handler);
#endif

#ifdef SIGBUS
  octave_set_signal_handler (SIGBUS, generic_sig_handler);
#endif

#ifdef SIGCHLD
  octave_set_signal_handler (SIGCHLD, sigchld_handler);
#endif

  // SIGCLD
  // SIGCONT

#ifdef SIGEMT
  octave_set_signal_handler (SIGEMT, generic_sig_handler);
#endif

#ifdef SIGFPE
#if defined (__alpha__)
  octave_set_signal_handler (SIGFPE, sigfpe_handler);
#else
  octave_set_signal_handler (SIGFPE, generic_sig_handler);
#endif
#endif

#ifdef SIGHUP
  octave_set_signal_handler (SIGHUP, sig_hup_or_term_handler);
#endif

#ifdef SIGILL
  octave_set_signal_handler (SIGILL, generic_sig_handler);
#endif

  // SIGINFO
  // SIGINT

#ifdef SIGIOT
  octave_set_signal_handler (SIGIOT, generic_sig_handler);
#endif

#ifdef SIGLOST
  octave_set_signal_handler (SIGLOST, generic_sig_handler);
#endif

#ifdef SIGPIPE
  octave_set_signal_handler (SIGPIPE, sigpipe_handler);
#endif

#ifdef SIGPOLL
  octave_set_signal_handler (SIGPOLL, SIG_IGN);
#endif

  // SIGPROF
  // SIGPWR

#ifdef SIGQUIT
  octave_set_signal_handler (SIGQUIT, generic_sig_handler);
#endif

#ifdef SIGSEGV
  octave_set_signal_handler (SIGSEGV, generic_sig_handler);
#endif

  // SIGSTOP

#ifdef SIGSYS
  octave_set_signal_handler (SIGSYS, generic_sig_handler);
#endif

#ifdef SIGTERM
  octave_set_signal_handler (SIGTERM, sig_hup_or_term_handler);
#endif

#ifdef SIGTRAP
  octave_set_signal_handler (SIGTRAP, generic_sig_handler);
#endif

  // SIGTSTP
  // SIGTTIN
  // SIGTTOU
  // SIGURG

#ifdef SIGUSR1
  octave_set_signal_handler (SIGUSR1, generic_sig_handler);
#endif

#ifdef SIGUSR2
  octave_set_signal_handler (SIGUSR2, generic_sig_handler);
#endif

#ifdef SIGVTALRM
  octave_set_signal_handler (SIGVTALRM, generic_sig_handler);
#endif

#ifdef SIGIO
  octave_set_signal_handler (SIGIO, SIG_IGN);
#endif

#if 0
#ifdef SIGWINCH
  octave_set_signal_handler (SIGWINCH, sigwinch_handler);
#endif
#endif

#ifdef SIGXCPU
  octave_set_signal_handler (SIGXCPU, generic_sig_handler);
#endif

#ifdef SIGXFSZ
  octave_set_signal_handler (SIGXFSZ, generic_sig_handler);
#endif

}

static Octave_map
make_sig_struct (void)
{
  Octave_map m;

#ifdef SIGABRT
  m.assign ("ABRT", SIGABRT);
#endif

#ifdef SIGALRM
  m.assign ("ALRM", SIGALRM);
#endif

#ifdef SIGBUS
  m.assign ("BUS", SIGBUS);
#endif

#ifdef SIGCHLD
  m.assign ("CHLD", SIGCHLD);
#endif

#ifdef SIGCLD
  m.assign ("CLD", SIGCLD);
#endif

#ifdef SIGCONT
  m.assign ("CONT", SIGCONT);
#endif

#ifdef SIGEMT
  m.assign ("EMT", SIGEMT);
#endif

#ifdef SIGFPE
  m.assign ("FPE", SIGFPE);
#endif

#ifdef SIGHUP
  m.assign ("HUP", SIGHUP);
#endif

#ifdef SIGILL
  m.assign ("ILL", SIGILL);
#endif

#ifdef SIGINFO
  m.assign ("INFO", SIGINFO);
#endif

#ifdef SIGINT
  m.assign ("INT", SIGINT);
#endif

#ifdef SIGIOT
  m.assign ("IOT", SIGIOT);
#endif

#ifdef SIGLOST
  m.assign ("LOST", SIGLOST);
#endif

#ifdef SIGPIPE
  m.assign ("PIPE", SIGPIPE);
#endif

#ifdef SIGPOLL
  m.assign ("POLL", SIGPOLL);
#endif

#ifdef SIGPROF
  m.assign ("PROF", SIGPROF);
#endif

#ifdef SIGPWR
  m.assign ("PWR", SIGPWR);
#endif

#ifdef SIGQUIT
  m.assign ("QUIT", SIGQUIT);
#endif

#ifdef SIGSEGV
  m.assign ("SEGV", SIGSEGV);
#endif

#ifdef SIGSTOP
  m.assign ("STOP", SIGSTOP);
#endif

#ifdef SIGSYS
  m.assign ("SYS", SIGSYS);
#endif

#ifdef SIGTERM
  m.assign ("TERM", SIGTERM);
#endif

#ifdef SIGTRAP
  m.assign ("TRAP", SIGTRAP);
#endif

#ifdef SIGTSTP
  m.assign ("TSTP", SIGTSTP);
#endif

#ifdef SIGTTIN
  m.assign ("TTIN", SIGTTIN);
#endif

#ifdef SIGTTOU
  m.assign ("TTOU", SIGTTOU);
#endif

#ifdef SIGURG
  m.assign ("URG", SIGURG);
#endif

#ifdef SIGUSR1
  m.assign ("USR1", SIGUSR1);
#endif

#ifdef SIGUSR2
  m.assign ("USR2", SIGUSR2);
#endif

#ifdef SIGVTALRM
  m.assign ("VTALRM", SIGVTALRM);
#endif

#ifdef SIGIO
  m.assign ("IO", SIGIO);
#endif

#ifdef SIGWINCH
  m.assign ("WINCH", SIGWINCH);
#endif

#ifdef SIGXCPU
  m.assign ("XCPU", SIGXCPU);
#endif

#ifdef SIGXFSZ
  m.assign ("XFSZ", SIGXFSZ);
#endif

  return m;
}

octave_child_list::octave_child_list_rep *octave_child_list::instance = 0;

bool
octave_child_list::instance_ok (void)
{
  bool retval = true;

  if (! instance)
    instance = new octave_child_list_rep ();

  if (! instance)
    {
      ::error ("unable to create child list object!");

      retval = false;
    }

  return retval;
}

void
octave_child_list::insert (pid_t pid, octave_child::child_event_handler f)
{
  if (instance_ok ())
    instance->insert (pid, f);
}

void
octave_child_list::reap (void)
{
  if (instance_ok ())
    instance->reap ();
}

bool
octave_child_list::wait (void)
{
  return (instance_ok ()) ? instance->wait () : false;
}

class pid_equal
{
public:

  pid_equal (pid_t v) : val (v) { }

  bool operator () (const octave_child& oc) const { return oc.pid == val; }

private:

  pid_t val;
};

void
octave_child_list::remove (pid_t pid)
{
  if (instance_ok ())
    instance->remove_if (pid_equal (pid));
}

#define OCL_REP octave_child_list::octave_child_list_rep

void
OCL_REP::insert (pid_t pid, octave_child::child_event_handler f)
{
  append (octave_child (pid, f));
}

void
OCL_REP::reap (void)
{
  // Mark the record for PID invalid.

  for (iterator p = begin (); p != end (); p++)
    {
      // The call to the octave_child::child_event_handler might
      // invalidate the iterator (for example, by calling
      // octave_child_list::remove), so we increment the iterator
      // here.

      octave_child& oc = *p;

      if (oc.have_status)
      {
        oc.have_status = 0;

        octave_child::child_event_handler f = oc.handler;

        if (f && f (oc.pid, oc.status))
          oc.pid = -1;
      }
    }

  remove_if (pid_equal (-1));
}

// Wait on our children and record any changes in their status.

bool
OCL_REP::wait (void)
{
  bool retval = false;

  for (iterator p = begin (); p != end (); p++)
    {
      octave_child& oc = *p;

      pid_t pid = oc.pid;

      if (pid > 0)
      {
        int status;

        if (octave_syscalls::waitpid (pid, &status, WNOHANG) > 0)
          {
            oc.have_status = 1;

            oc.status = status;

            retval = true;

            break;
          }
      }
    }

  return retval;
}

DEFUN (SIG, args, ,
  "-*- texinfo -*-\n\
@deftypefn {Built-in Function} {} SIG ()\n\
Return a structure containing Unix signal names and their defined values.\n\
@end deftypefn")
{
  octave_value retval;

  if (args.length () == 0)
    {
      static Octave_map m = make_sig_struct ();

      retval = m;
    }
  else
    print_usage ();

  return retval;
}

DEFUN (debug_on_interrupt, args, nargout,
  "-*- texinfo -*-\n\
@deftypefn {Built-in Function} {@var{val} =} debug_on_interrupt ()\n\
@deftypefnx {Built-in Function} {@var{old_val} =} debug_on_interrupt (@var{new_val})\n\
Query or set the internal variable that controls whether Octave will try\n\
to enter debugging mode when it receives an interrupt signal (typically\n\
generated with @kbd{C-c}).  If a second interrupt signal is received\n\
before reaching the debugging mode, a normal interrupt will occur.\n\
@end deftypefn")
{
  return SET_INTERNAL_VARIABLE (debug_on_interrupt);
}

DEFUN (sighup_dumps_octave_core, args, nargout,
  "-*- texinfo -*-\n\
@deftypefn {Built-in Function} {@var{val} =} sighup_dumps_octave_core ()\n\
@deftypefnx {Built-in Function} {@var{old_val} =} sighup_dumps_octave_core (@var{new_val})\n\
Query or set the internal variable that controls whether Octave tries\n\
to save all current variables to the file \"octave-core\" if it receives\n\
a hangup signal.\n\
@end deftypefn")
{
  return SET_INTERNAL_VARIABLE (sighup_dumps_octave_core);
}

DEFUN (sigterm_dumps_octave_core, args, nargout,
  "-*- texinfo -*-\n\
@deftypefn {Built-in Function} {@var{val} =} sigterm_dumps_octave_core ()\n\
@deftypefnx {Built-in Function} {@var{old_val} =} sigterm_dumps_octave_core (@var{new_val})\n\
Query or set the internal variable that controls whether Octave tries\n\
to save all current variables to the file \"octave-core\" if it receives\n\
a terminate signal.\n\
@end deftypefn")
{
  return SET_INTERNAL_VARIABLE (sigterm_dumps_octave_core);
}

/*
;;; Local Variables: ***
;;; mode: C++ ***
;;; End: ***
*/

Generated by  Doxygen 1.6.0   Back to index